Huaquan generatordaily maintenance mainly includes the following aspects to ensure its stable operation and extend its service life:
1. Filter replacement: It is recommended to replace the filter every 500 hours for the commonly used units and every two years for the standby units to prevent oil circuit blockage.
2. Battery maintenance: Regularly check the electrolyte level of the battery and add distilled water. Use a high-quality charger and perform equalization and floating charging operations to maintain the battery power.
3. Engine maintenance: Regularly check the water content of diesel to prevent rust and damage caused by condensed water entering the fuel tank. Pay attention to the condition of the engine oil and replace it regularly to maintain the lubrication effect.
4. Cooling system: Check the water pump, water tank and water pipeline, clean the scale and impurities to ensure the cooling effect. Check whether the water pipe joints, water tanks and waterways are leaking and repair them in time.
5. Fuel and gas distribution: Regularly clean the fuel system and replace the filter components to ensure smooth fuel supply. Adjust the gas distribution system to make the ignition uniform and improve the combustion efficiency.
6. Control system: Check the control part of the generator set, including whether the line connector is loose, whether the AVR module is working properly, etc., to ensure the stable operation of the unit.
7. Cleaning and dust removal: The generator room should be cleaned regularly to keep the internal environment clean. Use special cleaning tools or dust blowers to remove dust accumulated on the surface to prevent dust from entering the machine to affect heat dissipation and cause failures.
8. Inspection and tightening: Regularly check the tightening of various components of the generator, including screws, wiring terminals, etc., to ensure that they are firmly fixed to prevent failures caused by looseness.
9. Lubrication and oil level inspection: According to the manufacturer's recommendations, regularly replace or replenish the engine oil, and check other lubrication parts such as bearings, gears, etc. to ensure good lubrication. Check the oil level regularly to ensure that the oil level is within the normal range.
10. Cooling system inspection: Check the cooling system of the generator, including radiators, fans, water pumps, etc., to ensure that they are working properly and prevent overheating problems caused by poor cooling. Clean the radiator regularly to ensure its heat dissipation efficiency.
11. Electrical system inspection: Check the electrical system of the generator, including wires, cables, terminals, etc., to ensure that they are well connected and not damaged or aged. Check whether the voltage, current and other parameters are within the normal range to ensure the stable output of the generator.
12. Operation test: Regularly test the operation of the generator to check whether its start-up, operation, shutdown and other processes are smooth, and observe whether there are any abnormal sounds or vibrations.
Through the above maintenance measures, the performance and reliability of the Huaquan generator can be effectively improved to ensure that it can operate reliably at critical moments.
For more information, please visit:
http://www.360fadianjizu.com/news/
